Skip to main content
Biomass

Pellet ceramic igniters

Quick ignition and long lifespan components praised by the whole biomass heating industry.
Pellet ceramic igniter
Ceramic igniter for wood pellet stoves and boilers

Powerful

The model pledge by top pellet heating appliances manufacturers. High reliability, fast ignition, long history and simplicity of design.
PSx-2-240-B ceramic igniter for pellet stoves

Fast

Long rating life and ignition in 60~90s at 1000°C steady temperature. Ceramic heaters are simply the best for lighting pellets.

Thread bushing igniter for wood pellet stoves

Retrofit

A design to retrofit in most of wood pellet stoves, boiler or burner. Flangeless or 3/8" thread, find the design for your system.

Igniting wood pellets, chips and other biomass fuels

Introducing the FKK ceramic biomass igniter range, an advance in ignition technology for solid fuels.

FKK Corporation specialises in ceramic hot surface igniters and has many years experience of working closely with customers to develop bespoke solutions for innovative appliance manufacturers. We are a trusted manufacturer of hot surface ignition products to many industry sectors.

These advanced igniters are simply the best for lighting pellet and biomass burners. They use only a fraction of the energy required by hot air fans and ignition blowers and will light all fuel types. Ideal for wood pellets, chips, straw, corn etc.

With a considerably higher temperature, around twice that of traditional metal sheathed products, ignition times are reduced to as little as 60 seconds. This makes them significantly more economical in use.

Applications

Biomass
  • Pellet stove
  • Pellet boiler
  • Pellet burner
  • Pellet BBQ/grill
  • Wood chips boiler
  • Other solid biomass burner
Other
  • Laboratory equipments
  • Other specific equipments

Ceramic ignition technology benefits

  • Speed
    Time to ignition 60~90 seconds
  • Lifespan
    Long lasting (nearly non-aging)
  • Energy saving
    A fraction of the energy consumption compared to conventional cartridge or element heater
  • Reliability
    Tested to 150,000 cycles, 40 years of market feedbacks and enhancements
  • Emission decrease
    Reduces appliance particles emission thanks to shorter ignition phase
  • Temperature
    1000°C at steady-state temperature
  • Compatibility
    Easy to install and retrofit. Fits any steel tube with an inner diameter of ≥16~18mm
  • Ignition
    Ignite wood pellet, wood chips, split logs, straw and other solid biomass
  • Security
    Cannot overheat even with blower failure due to PTC property. Fully electrically insulated with no exposed electric contacts
  • Voltage
    Available in 100V / 120V / 230V AC
  • Robustness
    Impervious to oxidation and corrosion
  • Certification
    Comply with RoHS, REACH, CE regulation. TUV Sud and TUV Rheinland certified. UL certified wiring possible (200 to 500°C heat resistant wire)

A revolutionary way to ignite biomass

PSx series igniters revolutionize biomass heating appliances ignition process. FKK developed several types to fit in every appliances.

Tubular radiant structure type (Blowing air system: PSx-2 /PSx-7) ceramic igniters have a through hole that let air through the heating element body. With this structure, ignition performance can be increase by 1.4 times compare to metal cartridge heater.

External radiant structure type (PSx-1 / PSx-6) ceramic igniter heat the surround air for indirect ignition of pellet. These models are economical and more easy to install into airtight systems.

Universal solution

PSx series ceramic igniters fit in wood pellet, woods chips or any other biomass appliances. No matter the appliance, whether it's a stove, boiler, grill, or burner, our cutting-edge technology ensures quick and reliable ignition in every system.

Pellet ceramic igniter with pellet pot burner

More powerful ignition while consuming less

PSx series ceramic igniters revolutionize biomass heating appliances ignition process. It consume less energy (300W) compare to tradionatl metal cartridge igniter but reach 1000°C at steady-state temperature allowing an ignition of 60~90 seconds.
PSx-2-240-B wood pellet igniter for pellet stoves and pellet boilers

Ceramic heating element

1000°C in 60s

Ceramic bushing 17.7

Install in every tube of 18mm and more

Silicon glass cable

High temperature resistant

Through hole

Let air pass through hot heating element to get faster ignition

Line up

PSx ceramic igniters count many different customized models and can easily be design according to your requirements. Main models are as follow:
  • PSx-1: 26mm ceramic flange.
  • PSx-2: 17.7mm ceramic bushing
  • PSx-6 / 7: HEX 17 threaded bushing
PSx-1 pellet ceramic igniter

PSx-1

The most robust model pledge by top pellet stove and pellet boiler manufacturers.
PSx-2 pellet ceramic igniter

PSx-2

Fast ignition thanks to its tubular structure that allow to blow air through the heating element.
PSx-7 pellet ceramic igniter

PSx-6 / PSx-7

Made for retrofit of pellet stove systems. Hermetic (PSx-6) or tubular structure (PSx-7) possible.

PSx-1-240-B ceramic igniter drawing

PSx-1-240-B

  • Ø26mm ceramic flange
  • heat resistant glass sealing
  • 1000~1050°C
  • 300W~
  • 220~240V
Drawing    Data-sheet
PSx-2-240-B ceramic igniter drawing

PSx-2-240-B

  • Ø17.7mm ceramic bushing
  • Tube structure blow through
  • 1000~1050°C
  • 300W~
  • 220~240V
Drawing    Data-sheet
PSx-3-240-B ceramic igniter drawing

PSx-3-240-B

  • Retrofit flangeless solution
  • Diameter Ø11.6mm
  • 1000~1050°C
  • 300W~
  • 220~240V
Drawing    Data-sheet
PSx-4-240-B ceramic igniter drawing

PSx-4-240-B

  • Retrofit flangeless solution
  • Tube structure blow through
  • 1000~1050°C
  • 300W~
  • 220~240V
Drawing    Data-sheet
PSx-5-240-B ceramic igniter drawing

PSx-5-240-B

  • HEX 17 brass bushing
  • Retrofit flange solution
  • 1000~1050°C
  • 300W~
  • 220~240V
Drawing    Data-sheet
PSx-6-240-B ceramic igniter drawing

PSx-6-240-B

  • HEX 17 brass bushing
  • Hermetic
  • 1000~1050°C
  • 300W~
  • 220~240V
Drawing    Data-sheet
PSx-7-240-B ceramic igniter drawing

PSx-7-240-B

  • HEX 17 brass bushing
  • Tube structure blow through
  • 1000~1050°C
  • 300W~
  • 220~240V
Drawing    Data-sheet
PSx-1-120-W ceramic igniter drawing

PSx-1-120-W

  • Ø26mm ceramic flange
  • heat resistant glass sealing
  • 950~970°C
  • 240W~
  • 110~120V
Drawing    Data-sheet
PSx-2-120-W ceramic igniter drawing

PSx-2-120-W

  • Ø17.7mm ceramic bushing
  • Tube structure blow through
  • 950~970°C
  • 240W~
  • 110~120V
Drawing    Data-sheet
PSx-4-120-W ceramic igniter drawing

PSx-4-120-W

  • Retrofit flangeless solution
  • Tube structure blow through
  • 950~970°C
  • 240W~
  • 110~120V
Drawing    Data-sheet
PSx-7-120-W ceramic igniter drawing

PSx-7-120-W

  • HEX 17 brass bushing
  • Tube structure blow through
  • 950~970°C
  • 240W~
  • 110~120V
Drawing    Data-sheet

You have a question?

Contact us with the contact form