News

candeletta resistenza ceramica PSx-6 per stufe, bruciatori, caldaie a pellet

Perché la candeletta/resistenza in ceramica diventa mainstream per l'accensione delle stufe a pellet

24 October 2018

Le candelette/resistenze ceramiche ormai diventati la norma per l'accensione di stufe a pellet e caldaie a pellet. La maggior parte dei principali produttori di stufa a pellet italiani sono ora utilizzando resistenze in ceramica del FKK, obiettivo come spiegare questo successo? Questo nuovo video mostra quanto velocemente sono FKK Corpor...

Comparison between pellet ceramic and metal igniter

How fast ceramic igniters are compare to metal cartridge heater

25 September 2018

This new video shows how fast are FKK Corporation ceramic igniter products compare to conventional metal cartridge heaters. While the FKK PSx-6-240-B ceramic igniter reach 800°C within 40 s and maximum temperature of 1008°C after 100 s, a conventional metal cartridge heater only reach 800°C after 3 min 40s and a maximum temperature of 830...

metal tube for wood pellet burner ceramic igniter

Integration of ceramic igniter in wood pellet burner: we can help you

05 August 2018

Integrating a ceramic igniter into a wood pellet stove or biomass/wood pellet boiler line up could be very difficult, even for most experimented technician. It needs a lot testings and subtle changes in original parameters of the system. Thanks to a long a experience, FKK Corporation can provide you some examples of tubes and burner config...

Pellet igniters video – ceramic hot surface igniters for pellet burners temperature rise

19 October 2017

Video showing pellet igniters – ceramic hot surface igniters for biomass / pellet burners, pellet stove and pellet boiler. Ceramic igniter reach a steady temperature of 1,000 °C in extremely short time and allow a quick ignition of biomass olid fuel combustible within 60s to 90s. PSx-1 igniter temperature rise PSx-2 igniter temperature ri...

Wood pellet ceramic igniter applications

How work ceramic igniter in biomass/pellet applications

22 August 2017

Here you will find an overview of how HTH ceramic igniter works in wood pellet stoves, wood pellet boilers and woods chips boilers. HTH ceramic igniters are printed film PTC resistance encapsulated in ceramic alumina to deliver the best efficieny and resist to corrosion. In biomass heating applications, ceramic igniter are use in combination...

Ceramic heating element for Telescope Black body

FKK supplies High-temperature-heater for last generation telescope

09 February 2017

Photo credit: KEK/POLARBEAR collaboration. FKK is very proud to supply high temperature alumina ceramic heater for the next generation Polarbear telescope in Chile. The KEK (High Energy Accelerator Research Organization) of Tsukuba University in Japan, required a 1000°C temperature heater as black body radiation source for the calibration...